- IPMI Specification VersionThis nonselectable item displays the IPMI specification version.- BMC Firmware VersionThis nonselectable item displays the mini-BMC firmware version.- BMC Build DateThis nonselectable item displays the date that the mini-BMC code was built.- BMC Build LevelThis nonselectable item displays the version of the mini-BMC code.- Existing Event Log numberThis nonselectable item displays the number of entries in the system-eventlog.- BMC POST WatchdogThis option enables or disables the POST watchdog. Disabled is thedefault setting.- BMC POST Watchdog TimeoutThis option enables or disables the mini-BMC POST watchdog timer.- System - BMC Serial Port SharingSelect this choice to specify whether the serial port that the mini-BMC usesis shared with the other system components or is dedicated to themini-BMC. When this option is enabled, the mini-BMC controls the serialport by way of remote commands. If this option is disabled, the serial portis assigned to the mini-BMC, unless the BMC Serial Port Access Modeoption is disabled.- BMC Serial Port Access ModeSelect this choice to set the mini-BMC access mode for the system serialport. Shared is the default setting. You can choose from the followingaccess modes:SharedThe serial port is available for use by POST and the operatingsystem; however, the mini-BMC can still monitor the serial data fora take-control sequence.Pre-BootThe mini-BMC has control of the serial port prior before theoperating system is booted; however, after the operating system isbooted, the mini-BMC will not have access to the serial port untilyou turn off the server or reset the settings.DedicatedThe mini-BMC has complete control of the serial port. POST andthe operating system will not be allowed to use the serial port.DisabledThe mini-BMC has access to the serial port.- Reboot System on NMIThis option sets the mini-BMC timer to automatically reboot the server afteran NMI occurs. Enabled is the default setting.- User Account SettingsSelect this choice to view the user account settings for the mini-BMC.- BMC Network ConfigurationSelect this choice to configure specific network settings for the mini-BMC.Chapter 3. Configuring the server 61