IBM 436854u - System x3200 M2 5U Mini Tower Server User Manual

Also see for 4367BDU: Brochure & specs

Contents

This choice is on the Configuration/Setup Utility menu only.v System SecuritySelect this choice to set password. See “Using passwords” on page 62 for moreinformation about passwords.– Administrator PasswordThis choice is on the full Configuration/Setup Utility menu only.Select this choice to set or change an administrator password. Anadministrator password is intended to be used by a system administrator; itlimits access to the full Configuration/Setup Utility menu. If an administratorpassword is set, the full Configuration/Setup Utility menu is available only ifyou type the administrator password at the password prompt.– Power-on PasswordSelect this choice to set, change, or delete a power-on password.v Start OptionsSelect this choice to view or change the start options. Changes in the startoptions take effect when you restart the server.You can enable or disable the hard disk drive self-monitoring, analysis, andreporting technology (SMART) function.You can set keyboard operating characteristics, such as the keyboard speed, andyou can specify whether the server starts with the keyboard number lock on oroff.You can enable a virus-detecting test that checks for changes in the boot recordwhen the server starts.– Startup Sequence OptionsSelect this choice to view the Startup Sequence Options menu. The startupsequence specifies the order in which the server checks devices to find a bootrecord. The server starts from the first boot record that it finds.v Advanced SetupSelect this choice to change values for advanced hardware features, such asCPU options and PCI configuration.Important: The server might malfunction if these settings are incorrectlyconfigured. Follow the instructions on the screen carefully.This choice is on the full Configuration/Setup Utility menu only.– CPU OptionsSelect this choice to view or change the options that control the behavior ofthe microprocessor.– PCI Bus ControlSelect this choice to view or change the system resources that are used bythe installed PCI or PCI-Express devices.– RSA II SettingsThis choice is displayed only when a Remote Supervisor Adapter II SlimLineis installed in the server.Select this choice to view the DHCP IP address and settings and the RemoteSupervisor Adapter II SlimLine MAC address; to view or change the DHCPcontrol, static IP address, operating-system USB selections; and to save thevalues and reboot the Remote Supervisor Adapter II SlimLine.– Baseboard Management Controller (BMC) SettingSelect this choice to change the Intelligent Platform Management Interface(IPMI) settings for the mini-BMC controller.60 System x3200 M2 Types 4367 and 4368: User’s Guide