IBM 436854u - System x3200 M2 5U Mini Tower Server User Manual

Also see for 4367BDU: Brochure & specs

Contents

Select this choice to view the processor information, including the type, speed,and cache size of the microprocessor.v System InformationSelect this choice to view information about the server. When you make changesthrough other choices in the Configuration/Setup Utility program, some of thosechanges are reflected in the system information; you cannot change settingsdirectly in the system information.This choice is on the full Configuration/Setup Utility menu only.v Devices and I/O PortsSelect this choice to view or change device assignments and input/output (I/O)ports. Select this choice to enable or disable the integrated SAS/SATA controllerand Ethernet controller, and standard connectors (such as serial and parallel).Enable is the default setting for all controllers. If you disable a device, it cannotbe configured, and the operating system will not be able to detect it (this isequivalent to disconnecting the device). If you disable the SAS/SATA controllerand no SAS/SATA adapter is installed, the server will have no SAS/SATAcapability. If you disable the integrated Ethernet controller and no Ethernetadapter is installed, the server will have no Ethernet capability.This choice is on the full Configuration/Setup Utility menu only.– Serial Port 1Select this choice to set up serial port 1.– Serial Port 2Select this choice to set up serial port 2.– Parallel Port SetupSelect this choice to set up the parallel port and to adjust the parallel portresources and features.– Remote Console RedirectionSelect this choice to enable and configure serial remote video and keyboardredirection.– Internal Floppy SupportSelect this choice to disable or enable the diskette drive.– SATA Programming InterfaceSelect this choice to disable, enable, or configure the Serial ATA.To comply with the 4690 OS requirement, this option provides a Legacy Only(4690) mode that you can select from the menu. When you select the LegacyOnly (4690) mode, this enables the SATA 0 through SATA 3 ports for the4690 OS.– Planar EthernetSelect this choice to disable or enable the Ethernet on the system board.– USB SupportSelect this choice to enable or disable the USB support.– VideoSelect this choice to view the video information.– System MAC AddressesSelect this choice to view the MAC addresses for network devices that areinstalled in the server.v Date and TimeSelect this choice to set the date and time in the server, in 24-hour format(hour:minute:second).Chapter 3. Configuring the server 59