Note: Changes are made periodically to the IBM Web site. The actual proceduremight vary slightly from what is described in this document.1. Go to http://www.ibm.com/systems/support/.2. Under Product support, click System x.3. Under Popular links, click Software and device drivers.4. Click System x3200 M2 to display the matrix of downloadable files for theserver.5. Select the software or firmware package that you want to install. On the nextpage, click the link for each file that you want to download. Follow theinstructions that are displayed.6. Repeat step 5 until you have downloaded all the files that you need.7. Follow the instructions in the Remote Supervisor Adapter II SlimLine readme filethat you downloaded to install the software and firmware.8. Restart the server after the software and firmware are installed.Completing the setupSee the documentation that comes with IBM Remote Supervisor Adapter II SlimLinefor instructions for completing the configuration, including the following procedures:v Configuring the Ethernet portsv Defining login IDs and passwordsv Selecting the events that will receive alert notificationsv Monitoring remote server status by using the Remote Supervisor Adapter IISlimLine Web-based interfacev Controlling the server remotelyv Virtually attaching a remote diskette drive, CD or DVD drive, or disk image to theserverAfter you configure the Remote Supervisor Adapter II SlimLine, use the Web-basedinterface to create a backup copy of the configuration so that you can restore theconfiguration, if you have to replace the adapter. For more information, see theRemote Supervisor Adapter II SlimLine documentation.Chapter 3. Configuring the server 73
