Error Code/Symptom FRU/Action089-XXX-003 (Failed OptionalMicroprocessor test)Optional Microprocessor 3089-XXX-004 (Failed OptionalMicroprocessor test)Optional Microprocessor 4091-XXX-002 (Failed RXE port test) 1. RXE cable to RXE1002. RXE1003. I/O Board4. SMP2 (if installed)091-XXX-003 (Failed RXE port test) 1. RXE cable to RXE1002. RXE1003. System Board092-XXX-001 (Failed scalability port test) 1. Scalability cable2. SMP at far end of cable3. SMP at near end of cable4. SMP2 (if installed)166-198-000(BIOS cannot detect ASM. Reseat ASMadapter in correct slot) (ASM restartfailure. Unplug and cold boot server torest ASM)1. Rerun diagnostic test2. Fix other error conditions (including other failed System Managementtests and items logged in Remote Supervisor Adapter system errorlog) and retry3. Disconnect all server and option power cords from server, wait 30seconds, reconnect, and retry4. Remote Supervisor Adapter5. System Board166-201-000(ISMP indicates I2C errors on bus X) 1. Remote Supervisor Adapter2. System Board166-201-001(ISMP indicates I2C errors on bus P) 1. Operator Interface Card2. Power Backplane3. Light path card assembly4. Power Supplies (one at a time)5. System Board166-201-002(ISMP indicates I2C errors on bus I)System Board166-201-003(ISMP indicates I2C errors on bus C) 1. Microprocessor(s)2. System Board166-201-004(ISMP indicates I2C errors on bus M) 1. DIMMs (1-2, 3-4, 5-6, 7-8)2. Memory Card3. System Board166-201-005(ISMP indicates I2C errors on bus S) 1. Media Backplane2. Light path card assembly3. System Board166-201-008(ISMP indicates I2C errors on bus V) 1. Microprocessor VRM(s)2. System Board122 Hardware Maintenance Manual: xSeries 360 Type 8686
