Safety notices (multilingual translations)The caution and danger safety notices in this section are provided in the followinglanguages:v Englishv Brazilian/Portuguesev Chinesev Frenchv Germanv Italianv Japanesev Koreanv SpanishImportant: All caution and danger statements in this IBM documentation begin witha number. This number is used to cross reference an English caution ordanger statement with translated versions of the caution or dangerstatement in this section.For example, if a caution statement begins with a number 1,translations for that caution statement appear in this section understatement 1.Be sure to read all caution and danger statements before performingany of the instructions.Statement 1DANGERElectrical current from power, telephone and communication cables is hazardous.To avoid a shock hazard:v Do not connect or disconnect any cables or perform installation, maintenance, orreconfiguration of this product during an electrical storm.v Connect all power cords to a properly wired and grounded electrical outlet.v Connect to properly wired outlets any equipment that will be attached to thisproduct.v When possible, use one hand only to connect or disconnect signal cables.v Never turn on any equipment when there is evidence of fire, water, or structuraldamage.v Disconnect the attached power cords, telecommunications systems, networks, andmodems before you open the device covers, unless instructed otherwise in theinstallation and configuration procedures.v Connect and disconnect cables as described in the following table when installing,moving, or opening covers on this product or attached devices.To Connect To Disconnect1. Turn everything OFF.2. First, attach all cables to devices.3. Attach signal cables to connectors.4. Attach power cords to outlet.5. Turn device ON.1. Turn everything OFF.2. First, remove power cords from outlet.3. Remove signal cables from connectors.4. Remove all cables from devices.Related service information 149
