The compute node might have features that are not described in the documentation that comes with thecompute node. Occasional updates to the documentation might include information about those features,or technical updates might be available to provide additional information that is not included in thedocumentation that comes with the compute node.Review the IBM Flex System Information Center or the Planning Guide and the Installation Guide for yourIBM Flex System Enterprise Chassis. The information can help you prepare for system installation andconfiguration. The most current version of each document is available in the IBM Flex SystemInformation Center.Related information:IBM Flex System Information CenterIBM documentation CDYou can run the IBM Flex System Enterprise Chassis Documentation CD on any personal computer thatmeets the hardware and software requirements.The CD contains documentation for your compute node in a PDF file and includes the IBMdocumentation browser to help you find information quickly.Hardware and software requirementsThe IBM Documentation CD requires the following minimum hardware and software levels.v Microsoft Windows XP Professional, Windows 2000, or Red Hat Enterprise Linuxv 100 MHz Microprocessorv 32 MB of RAMv Adobe Acrobat Reader 3.0 (or later) or xpdf viewer, which comes with Linux operating systemsUsing the documentation browserUse the documentation browser to browse the contents of the CD, to read brief descriptions of thedocuments, and to view documents by using Adobe Acrobat Reader or xpdf viewer.About this taskThe documentation browser automatically detects the regional settings in your system and displays thedocuments in the language for that region (if available). If a document is not available in the language forthat region, the English-language version is displayed.To start the documentation browser, use one of the following procedures:v If Autostart is enabled, insert the CD into the CD or DVD drive. The documentation browser startsautomatically.v If Autostart is disabled or is not enabled for all users, use one of the following procedures:– If you are using a Windows operating system, insert the CD into the CD or DVD drive and clickStart > Run. In the Open field, type the following string, where e is the drive letter of the CD orDVD drive, and click OK:e:\win32.bat– If you are using Red Hat Enterprise Linux, insert the CD into the CD or DVD drive, and then runthe following command from the /mnt/cdrom directory:sh runlinux.sh4 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide
