D1FF1XXXExplanation: Dump completeResponse:1. Go to Checkout procedure.2. Replace the system-board, as described in Replacing the system-board and chassis assembly.D1XX3YYYExplanation: Platform dump status codes are described in D1xx3y01 to D1xx3yF2 Service processor dump codesResponse:D1xx3yzz service processor dump codes:These D1xx3yzz service processor dump codes use the format: D1xx3yzz, where xx indicates the cage ornode ID that the dump component is processing, y increments from 0 to F to indicate that the system isnot hung, and zz indicates the command being processed.The D1xx3yzz dump codes below are the progress codes that might be displayed during the power-onself-test (POST), along with suggested actions to take if the system hangs on the progress code. Onlywhen you experience a hang condition should you take any of the actions described for a progress code.If the system hangs on a progress code, follow the suggested actions in the order in which they are listeduntil the problem is solved. If an action solves the problem, you can stop performing the remainingactions. See Chapter 7, “Parts listing for IBM Flex System p260 and p460 Compute Nodes,” on page 97 todetermine which components are CRUs and which components are FRUs.D1XX3Y01Explanation: Get SCOMResponse:1. Go to Checkout procedure.2. Replace the system-board, as described in Replacing the system-board and chassis assembly.D1XX3Y02Explanation: Get scan ringResponse:1. Go to Checkout procedure.2. Replace the system-board, as described in Replacing the system-board and chassis assembly.D1FF1XXX • D1XX3Y02Chapter 8. Troubleshooting 297
