Forms Handling32Forms HandlingPedestal models provide access to printed forms either from the tear-at-perforation edge on the top cover or the cover isadjusted so the forms exit from the rear of the printer. Pedestal models also have a wireform paper tray attached to the front ofthe pedestal and a wireform catch basket attached to the rear of the pedestal.Cabinet models can be equipped with three types of paper stacking device. The simplest is a fixed paper fence used incombination with the paper guide chains that come on all cabinet models. The paper fence is a wireform divider that separatesthe source paper stack from the printed output stack. For improved performance at higher throughputs, the guide chains areused with a moveable fence called the “passive stacker,” which can be adjusted to match the form’s length. For moredemanding applications, an optional power stacker is available for the 1500 and 2000 lpm cabinet models. This information issummarized in Table 2. For more information about the power stacker, refer to Appendix E on page 451.Table 2. The Paper Stackers on Cabinet ModelsPrinter TypeFixed PaperFence andPassive PaperStackerPower PaperStacker6500-v05 Standard NotAvailable6500-v10 Standard NotAvailable6500-v15 Standard Option6500-v20 Standard Option
