FRU NameAIX LocationCodePhysicalLocation CodePhysicalConnectionLogicalIdentificationI/O fan connector P2/F2 Fan connector J3at system boardCEC fanconnectorP2/F1 Fan connectorJ21 at systemboardOperator PanelOperator panel L1 I/O boardconnector J1Operator panelConnectorP2/L1 I/O boardconnector J1Power SupplyPower supply V1BatteryBattery V2 I/O boardconnector J11Notes:1. The physical location code for the PCI slots, when empty, uses the P1/Ix notation, where the’/’ identifies an integrated device (in this case the empty slot). A PCI device plugged into theslot uses the P1-Ix notation, where the ’-’ identifies a plugged device.2. The SCSI bus IDs are the recommended values. The SCSI IDs shown for media devicesindicate how the devices are set when they are shipped from the factory. Field installationsmay not comply with these recommendations.SpecificationsThe mechanical packaging, cooling, power supply, and environmental requirements forthe server are as follows:Dimensionsv With pedestal:– Height - 615 mm (24.2 inches)– Depth - 681 mm (26.8 inches)– Width - 340 mm (13.4 inches)v Without pedestal:– Height - 610 mm (24.0 inches)– Depth - 681 mm (26.8 inches)– Width - 221 mm (8.7 inches)Chapter 1. Reference Information 17
