Quick Entry MAP Table of ContentsProblem Description Page No.Service Actions 28System Stops With an 8-Digit Number Displayed 28System Stops With a 4-Digit Number Displayed 28System Stops With a 3-Digit Number Displayed 29System Stops or Hangs With Alternating Numbers Displayed in theOperator Display Panel.29Display Problem (Distortion, Blurring, Etc.) 29Power and Cooling Problems 30Flashing 888 in Operator Panel Display 30Other Symptoms or Problems 30You Cannot Find the Symptom in this Table 33Symptom ActionService ActionsYou have parts to exchange or a correctiveaction to perform. 1. Go to Chapter 9, “Removal and ReplacementProcedures”, on page 223.2. Go to "MAP 410: Repair Checkout" in theRS/6000 and Eserver pSeries DiagnosticsInformation for Multiple Bus Systems.You need to verify that a part exchange orcorrective action corrected the problem.Go to "MAP 410: Repair Checkout" in theRS/6000 and Eserver pSeries DiagnosticsInformation for Multiple Bus Systems.You need to verify correct system operation. Go to "MAP 410: Repair Checkout" in theRS/6000 and Eserver pSeries DiagnosticsInformation for Multiple Bus Systems.System Stops With A 8-Digit Number DisplayedThe system stops with an 8-digit error codedisplayed in the operator panel display or onthe console.Record the error code. Go to Chapter 5, “ErrorCode to FRU Index”, on page 93.System Stops With A 4-Digit Number Displayed28 Service Guide
