IBM System x3690 X5 Installation And User Manual

Also see for System x3690 X5: Implementation guide At-a-glance reference guide At-a-glance guide Manual Product guide

Contents

IBM System x3690 X5 Installation And User Manual Manual pdf 56 page image

Installation guidelinesAttention: Static electricity that is released to internal server components whenthe server is powered-on might cause the system to halt, which might result in theloss of data. To avoid this potential problem, always use an electrostatic-dischargewrist strap or other grounding system when removing or installing a hot-swapdevices.Before you install optional devices, read the following information:v Read the safety information that begins on page “Safety” on page v and theguidelines in “Handling static-sensitive devices” on page 46. This informationwill help you work safely.v Make sure that the devices that you are installing are supported.v Make sure that the devices that you are installing are supported. For a list ofsupported optional devices for the server (or the MAX5, if one is connected tothe server) go to http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/.v When you install your new server, take the opportunity to download and applythe most recent firmware updates. This step will help to ensure that any knownissues are addressed and that your server is ready to function at maximumlevels of performance. To download firmware updates for your server, go tohttp://www.ibm.com/support/fixcentral/.Important: Some cluster solutions require specific code levels or coordinatedcode updates. If the device is part of a cluster solution, verify that the latest levelof code is supported for the cluster solution before you update the code.For additional information about tools for updating, managing, and deployingfirmware, see the ToolsCenter for System x and BladeCenter athttp://publib.boulder.ibm.com/infocenter/toolsctr/v1r0/index.jsp.v Before you install optional hardware, make sure that the server is workingcorrectly. Start the server, and make sure that the operating system starts, if anoperating system is installed, or that a 19990305 error code is displayed,indicating that an operating system was not found but the server is otherwiseworking correctly. If the server is not working correctly, see the ProblemDetermination and Service Guide on the IBM Documentation CD for informationabout how to run diagnostics.v Observe good housekeeping in the area where you are working. Place removedcovers and other parts in a safe place.v Do not attempt to lift an object that you think is too heavy for you. If you haveto lift a heavy object, observe the following precautions:– Make sure that you can stand safely without slipping.– Distribute the weight of the object equally between your feet.– Use a slow lifting force. Never move suddenly or twist when you lift a heavyobject.– To avoid straining the muscles in your back, lift by standing or by pushingup with your leg muscles.v Make sure that you have an adequate number of properly grounded electricaloutlets for the server, monitor, and other devices.v Back up all important data before you make changes to disk drives.v Have a small flat-blade screwdriver available.v To view the error LEDs on the system board and internal components, leave theserver connected to power.44 System x3690 X5 Types 7147, 7148, 7149, and 7192: Installation and User's Guide