1. Insert the CD, and restart the server. If the CD does not start, see “ServerGuideproblems” on page 185.2. Follow the instructions on the screen to complete the following steps:a. Select your language.b. Select your keyboard layout and country.c. View the overview to learn about ServerGuide features.d. View the readme file to review installation tips for your operating systemand adapter.e. Start the operating-system installation. You will need your operating-systemCD.ServerGuide featuresFeatures and functions can vary slightly with different versions of the ServerGuideprogram. To learn more about the version that you have, start the ServerGuide Setupand Installation CD and view the online overview. Not all features are supported onall server models.The ServerGuide program performs the following tasks:v Sets system date and timev Detects the RAID adapter or controller and runs the SAS/SATA RAIDconfiguration programv Checks the microcode (firmware) levels of a ServeRAID adapter and determineswhether a later level is available from the CDv Detects installed hardware options and provides updated device drivers formost adapters and devicesv Provides diskette-free installation for supported Windows operating systemsv Includes an online readme file with links to tips for your hardware andoperating-system installationSetup and configuration overviewWhen you use the ServerGuide Setup and Installation CD, you do not need setupdiskettes. You can use the CD to configure any supported IBM server model. Thesetup program provides a list of tasks that are required to set up your servermodel. On a server with a ServeRAID adapter or SAS/SATA controller with RAIDcapabilities, you can run the SAS/SATA RAID configuration program to createlogical drives.Note: Features and functions can vary slightly with different versions of theServerGuide program.126 System x3750 M4 Types 8722 and 8733: Installation and Service Guide
