Completing the installationTo complete the installation, complete the following steps:1. If you removed the server cover, replace it and close the fan doors. For moreinformation, see “Replacing the server cover.”2. Slide the server back into the rack. If you removed the server from the rack, seethe Rack Installation Instructions that come with the server for instructions forinstalling the server in the rack.3. Connect the cables and power cords. For more information, see “Connectingthe cables.”4. Update the server configuration. See “Updating the server configuration” onpage 39 for more information.Replacing the server coverTo replace the server cover, complete the following steps:1. Make sure that all internal cables are routed correctly.2. Slide the cover forward, making sure that all the tabs on the front, rear, and sideof the cover engage the chassis correctly.3. Close the fan door and slide the fan cover release latches to the right to lockthe cover in place.ThumbscrewFan door4. Tighten the thumbscrew at the back of the server.5. Slide the server into the rack.Connecting the cablesThe following illustrations show the locations of the input and output connectors onthe front and rear of the server.Front viewVideo connectorUSB 4 connectorUSB 3 connectorRear view38 IBM System x3350 Types 4192 and 4193: User’s Guide
