IBM x3350 - System - 4192 User Manual

Also see for System x3350 Type 4192: Installation guide

Contents

- User Account SettingsSelect this choice to define user names and passwords for logging in to theBMC to remotely control settings on the server.- BMC Network ConfigurationSelect this choice to view the BMC MAC address, the DHCP IP addressand configure DHCP control.- BMC System Event LogSelect this choice to view the BMC system event log, which containsmessages about system events, such as the event entry number,timestamp, sensor type, sensor number, and event description. SelectClear BMC SELs to clear the BMC system event log.– High Precision Event TimerSelect this choice to enable or disable the high precision event timer.v Event/Error LogsSelect this choice to view and clear the System Event/Error Log and the RemoteSupervisor Adapter II event/error log.– System Event/Error LogSelect this choice to view the events and errors that were generated duringPOST and by the system management interface (SMI) handler. The mostrecent event is displayed first. Use the arrow keys to move among pages inthe log. Select Clear System Logs to clear the system event/error log.– RSA II Event/Error LogThis choice is available only if an optional Remote Supervisor Adapter IISlimLine is installed.Select this choice to view the error messages in the Remote SupervisorAdapter II event/error log. Use the arrow keys to move among pages in thelog. Select Clear RSA II logs to clear the Remote Supervisor Adapter IIevent/error log.The Remote Supervisor Adapter II event/error log contains all event and errormessages that have been generated during POST, by the system interfacehandler, and by the system service processor. The most recent event or erroris displayed first.Important: If the system-error LED on the front of the server is lit but thereare no other error indications, clear the Remote Supervisor Adapter IIevent/error log. This log does not clear itself, and if it begins to fill up, thesystem-error LED will be lit.v Save SettingsSelect this choice to save the changes that you have made in the settings.v Restore SettingsSelect this choice to cancel the changes that you have made in the settings andrestore the previous settings.v Load Default SettingsSelect this choice to cancel the changes that you have made in the settings andrestore the factory settings.v Exit SetupSelect this choice to exit from the Configuration/Setup Utility program. If you havenot saved the changes that you have made in the settings, you are askedwhether you want to save the changes or exit without saving them.46 IBM System x3350 Types 4192 and 4193: User’s Guide