Safety statementsThese statements provide the caution and danger information that is used in thisdocumentation.Important:Each caution and danger statement in this documentation is labeled with anumber. This number is used to cross reference an English-language caution ordanger statement with translated versions of the caution or danger statement inthe Safety Information document.For example, if a caution statement is labeled Statement 1, translations for thatcaution statement are in the Safety Information document under Statement 1.Be sure to read all caution and danger statements in this documentation before youperform the procedures. Read any additional safety information that comes withyour system or optional device before you install the device.Statement 1DANGERElectrical current from power, telephone, and communication cables ishazardous.To avoid a shock hazard:v Do not connect or disconnect any cables or perform installation,maintenance, or reconfiguration of this product during an electrical storm.v Connect all power cords to a properly wired and grounded electrical outlet.v Connect to properly wired outlets any equipment that will be attached tothis product.v When possible, use one hand only to connect or disconnect signal cables.v Never turn on any equipment when there is evidence of fire, water, orstructural damage.v Disconnect the attached power cords, telecommunications systems,networks, and modems before you open the device covers, unlessinstructed otherwise in the installation and configuration procedures.v Connect and disconnect cables as described in the following table wheninstalling, moving, or opening covers on this product or attached devices.To Connect: To Disconnect:1. Turn everything OFF.2. First, attach all cables to devices.3. Attach signal cables to connectors.4. Attach power cords to outlet.5. Turn device ON.1. Turn everything OFF.2. First, remove power cords from outlet.3. Remove signal cables from connectors.4. Remove all cables from devices.Safety vii
