4-6Installing and Starting ICP Storage Manager3 Use pkgadd to install ICP Storage Manager:pkgadd -d /mnt/unixware/manager/RaidMan.ds4 Follow the instructions on the screen to complete the installation.5 Unmount the CD drive:umount /mnt6 UnixWare Only—To start RAID Agent, type the following case-sensitive command:sh /opt/RaidMan/RaidAgnt.shWhen successful, a copyright message is displayed in theterminal window.If you want RAID Agent to run at startup all the time, add thefollowing line to the /etc/inittab and /etc/conf/init.d/kernel files:nfra:12346:once:sh /opt/RaidMan/RaidAgnt.shInstalling ICP Storage Manager on NetWareNotes:■ With NetWare, ICP Storage Manager can be used tomanage up to 16 ICP RAID controllers.■ You need the latest Support Pack for your operating systemso you can run the supported Java Virtual Machine (JVM).■ You need JVM version 1.3 or later. To check your JVMversion, load JVM, type JAVA -VERSION.■ For the latest updates from Novell, visit www.novell.com.To install ICP Storage Manager on Netware:1 Insert the controller installation CD.2 From the command prompt, type load cdrom and press Enterif the CD is not mounted automatically.
