IDS X Series User Manual
Also see for X Series: Installer manualInstaller manualTraining manualQuick start guideInstaller manual
                                | |
Contents
| 
Section: 5IDS X-series LCD Keypad User Manual 700-411-01D Issued August 2010125. The LCD display reads „Zone Number + *‟.6. Enter the [ZONE NUMBER] followed by the [*] key. Alternatively, you can use the [PANIC] and[MED] keys to scroll through the zones.7. [Y] next to the zone number indicates that the zone has been bypassed, whilst [N] indicates thatthe zone has not been bypassed.8. Press the [*] key to toggle between zones being on and off.9. Repeat steps 6-8 to bypass/un-bypass other zones.10. Press the [#] key to exit the bypass mode.NOTE:Panic zones cannot be bypassed.6. Emergency Alarms6.1 Fire Alarms(Hold down the [F] key for two seconds until the keypad buzzer sounds) If the [F] key is pressed until the keypad beeps (approximately 2 seconds) a FIRE ALARMcondition will be activated. The LCD display reads „Alarm!‟ alongside the relevant partition. The FIRE ALARM CONDITION may also be triggered by a smoke detector connected to anappropriately programmed zone. The siren will sound on and off repeatedly, if programmed, and the FIRE REPORTING CODE willbe transmitted to the monitoring company. To silence the siren enter a valid [USER CODE].6.2 Panic Alarms(Hold down the [P] key for two seconds until the keypad buzzer sounds) If the [P] key is pressed until the keypad beeps (approximately 2 seconds) a PANIC ALARMcondition will be activated. The LCD display reads „Alarm!‟ alongside the relevant partitionnumber. A PANIC ALARM may also be activated using any FIXED PANIC button or a REMOTE PANICbutton (if installed). If the audible panic option has been selected, the siren will sound. A PANIC ALARM will betransmitted to the monitoring company. To silence the siren, enter a valid [USER CODE]. Press the [P] key only in an emergency situation that requires response by emergencypersonnel.6.3 Medical Alarms(Hold down the [M] key for two seconds until the keypad buzzer sounds) If the [M] key is pressed until the keypad beeps (approximately 2 seconds) a MEDICAL ALARMcondition will be activated. |
Related manuals for IDS X Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine