IDS X Series User Manual
Also see for X Series: Installer manualInstaller manualTraining manualQuick start guideInstaller manual
                                | |
Contents
| 
Section: 8IDS X-series LCD Keypad User Manual 700-411-01D Issued August 2010 214. Press the [*] key.5. The LCD display reads „User Code + *‟.6. Enter the [USER CODE] followed by the [*] key.7. The LCD display reads „RC Option + *'.8. Enter the [BITMAP] that you want followed by the [*] key.9. Press the [*] key to toggle between ON and OFF.10. Press the [#] key to exit the User Program Mode.Table 5: Enable User Reporting CodesLED On / Off Action1 ON Enable close RCOFF Disable close RC2 ON Enable stay close RCOFF Disable stay close RC3 ON Enable open RCOFF Disable open RC4 ON Enable siren cancel RCOFF Disable siren cancel RC5 ON Enable access RCOFF Disable access RC8.3.11 Option 15 – User Reporting Code Telephone Modules[MASTER CODE] [*] [1] [5] [*] [USER CODE] [*] [BITMAP] [*] [#]1. Enter the User Program Mode as per steps 1 - 4 of section 8.2.2. The LCD display reads „Option Menu‟, „Add User Code‟.3. To select menu option 15 – „User RC Modules‟, press the [1] [5] keys or alternatively use the[PANIC] or [MED] keys to scroll through the list of programmable options until you reach theoption you want.4. Press the [*] key.5. The LCD display reads „User Code + *‟.6. Enter the [USER CODE] followed by the [*] key.7. The LCD display reads „RC Code <*>‟.8. Enter the [BITMAP] that you want followed by the [*] key.9. Press the [*] key to toggle between ON and OFF.10. Press the [#] key to exit the User Program Mode.Table 6: Specify which Telephone Module to useLED On / Off Action1 ON Telephone Module 2 |
Related manuals for IDS X Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine