IDS X Series User Manual

Also see for X Series: Installer manual Installer manual Training manual Quick start guide Installer manual

IDS X Series User Manual Manual pdf 16 page image

Section: 8IDS X-series LCD Keypad User Manual 700-411-01D Issued August 2010163. To select menu option 1 – „Edit User Code‟, press the [1] key or alternatively use the [PANIC] or[MED] keys to scroll through the list of programmable options until you reach the option youwant.4. Press the [*] key.5. The LCD display reads „Old Code + *‟.6. Enter the [USER CODE] you wish to edit followed by the [*] key.7. The LCD display reads „New Code + *‟.8. Enter the [NEW CODE] followed by the [*] key. To move the cursor within the NEW CODE, usethe [PANIC] or [MED] keys.9. To edit other codes repeat steps 5 - 7.10. Press the [#] key to exit the User Program Mode.8.3.3 Option 2 - Delete User Code (Code known)[*] [MASTER CODE] [*] [2] [*] [USER CODE] [*] [#]1. Enter the User Program Mode as per steps 1 - 4 of section 8.2.2. The LCD display reads „Option Menu‟, „Add User Code‟.3. To select menu option 2 – „Delete User Code‟, press the [2] key or alternatively use the [PANIC]or [MED] keys to scroll through the list of programmable options until you reach Menu Option 2.Press the [*] key.4. The LCD display reads „User Code + *‟.5. Enter the [USER CODE] to be deleted followed by the [*] key. 'Deleting' the code in slot one willreprogram it to 1234.6. Further codes may be deleted by repeating step 5.7. Press the [#] key to exit User Program Mode.8.3.4 Option 3 – Add/Edit Code[*] [MASTER CODE] [*] [3] [*] [SLOT NUMBER] [*] [USER CODE] [*] [#]1. Enter the User Program Mode as per steps 1 - 4 of section 8.2.2. The LCD display reads „Option Menu‟, „Add User Code‟.3. To select menu option 3 – „Add/Edit Slot‟, press the [3] key or alternatively use the [PANIC] or[MED] keys to scroll through the list of programmable options until you reach the option youwant.4. Press the [*] key.5. The LCD display reads „Slot + *‟.6. Enter the [SLOT NUMBER] to be added/edited followed by the [*] key.7. The LCD display reads „New Code + *‟, „Slot number‟.8. Enter the [USER CODE] followed by the [*] key.9. Further slots may be added/edited by repeating steps 6 - 8.10. Press the [#] key to exit User Program Mode.8.3.5 Option 4 - Delete a User Code ("Slot" known)[*] [MASTER CODE] [*] [4] [*] [SLOT NUMBER] [*] [#]1. Enter the User Program Mode as per steps 1 - 4 of section 8.2.2. The LCD display reads „Option Menu‟, „Add User Code‟.