Icom IC-7100 Instruction Manual

Also see for IC-7100: Finger touch operation Specification Basic Manual Service manual Advanced instructions

Contents

Icom IC-7100 Instruction Manual Manual pdf 34 page image

4 RECEIVE AND TRANSMIT4-18Previous view• Preprogrammed contentsCH ContentsRT1 DE ICOM ICOM KRT2 DE ICOM ICOM ICOM KRT3 QSL UR 599–599 BKRT4 QSL DE ICOM ICOM UR 599–599 BKRT5 73 GL SKRT6 CQ CQ CQ DE ICOM ICOM ICOM KRT7 MY TRANSCEIVER IS IC–7100 & ANTENNA IS A3–ELEMENT TRIBAND YAGI.RT8 MY RTTY EQUIPMENT IS INTERNAL FSK UNIT &DEMODULATOR OF THE IC–7100.Touch “Edit”• RTTY memory programming mode• RT1 default indicationInput a spaceSelect Alphabet or Number inputMove the cursorMove the cursorDelete a characterSelect a SymbolEnterCancel editTouch [EDIT]Touch the desiredchannel for 1 sec-ondEditing an RTTY memoryDThe contents of the RTTY memories can be set on theRTTY Memory (Edit) screen. The RTTY memory canmemorize and retransmit 8 RTTY message for often-used RTTY information. The total capacity of the RTTYmemory is 70 characters per memory channel.• Programming contentsq In the RTTY mode, push MENU (C) one or moretimes to select the “M-2” screen (M-2 menu).Touch [DEC](w D) to display the RTTY decoderscreen.• Touch [WIDE](D) to toggle the decode screen size be-tween normal and wide.Touch [<1>](e D) to display the RTTY decoder (2)screen.• Touch [<1>] or [<2>](D) to toggle between the RTTY de-coder and the RTTY decode (2) screens.Touch [EDIT](r D) to display the “RTTY MEMORY”(Edit) screen.• The memory contents are displayed.Touch for 1 second on a desired memory channel totbe edited, and then touch “Edit.”• Touch [ ] or [ ](D) to select the displayed page.• The memory programming screen appears.Touch the desired block one or more times to selectythe desired character or symbol.Selectable characters and symbolsABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890! $ & ? " ' – / . , : ; ( ) • Touch “AB12” to toggle between the Alphabet inputand Number input mode.• Touch [CLR](D) to delete the selected character, symbolor number.• Touch [SYMB] (D) to open the Symbol character selec-tion window.• Touch “” to input a space.Touch [u ](D) or [](D) to move the cursor back-wards or forwards.Repeat stepsi y and u to program up to 70 charac-ters of memory contents, and then push [ENT](D).Touch [o ](D) or push MENU (C) to return to theRTTY Decode (2) screen.The functions for RTTY operation (Continued)The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch panel)Left RightCenterDisplay