Icom IC-7100 Instruction Manual

Also see for IC-7100: Finger touch operation Specification Basic Manual Service manual Advanced instructions

Contents

Icom IC-7100 Instruction Manual Manual pdf 69 page image

6 FUNCTIONS FOR TRANSMIT6-8Previous viewThe L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch panel)Left RightCenterDisplaySplit frequency operationSplit frequency operation allows you to transmit andreceive on two different frequencies. Split frequencyoperation is performed using frequencies in VFO A andVFO B.• The Split frequency operation is automatically turned OFFwhen turning ON the One-touch repeater function.The following is an example of setting 21.290 MHz/USB mode for receiving and 21.310 MHz/USB modefor transmitting.Set 21.290 MHz in VFO A and select the USBqmode.Pushw MENU (C) one or more times to select the“M-1” screen (M-1 menu).Touch [SPLIT](e D) to turn ON the Split function.• The transmit frequency (VFO B) and “SPLIT” appear.• If desired, tap [SPLIT](D) again to turn OFF the func-tion.Set 21.310 MHz in VFO B and select the USB mode.rThe setting method has the three following ways.(1) While holding down XFC (R) in VFO A, rotate theDial to set the transmit frequency to 21.310 MHzin VFO B, and then select the operating mode toUSB.• While holding down XFC (R), you can change thefrequency band and operating mode in VFO B.• While holding down XFC (R), the transceiver re-ceives the transmit frequency in VFO B.(2) Touch [A/B](D) to select VFO B, rotate the Dialto set the transmit frequency to 21.310 MHz, andthen select the operating mode to USB.(3) Use the Quick Split function.• The Quick Split function is much more convenient forselecting the transmit frequency. See the next contentfor details.t Now you can receive on 21.290 MHz and transmit on21.310 MHz.To change the transmit and receive frequencies, push[A/B] to exchange VFO A and VFO B.• While holding down XFC• After setting upSplit iconTouch [SPLIT]Shows the transmit frequency (VFO B)Shows the transmit frequency (VFO B)Shows the frequency shift and direction