4 RECEIVE AND TRANSMIT4-19Previous view• RTTY decode logSD card iconTurning ON the RTTY decode logDTurn ON the RTTY decode log to store your RTTY op-erating record, both TX and RX, into an SD card.Be sure to insert the SD card, otherwise this functiondoes not work properly. The SD card is not suppliedbyu Icom.q In the RTTY mode, push MENU (C) one or moretimes to select the “M-2” screen (M-2 menu).Touch [DEC](w D) to display the RTTY decoderscreen.• Touch [WIDE](D) to toggle the decode screen size be-tween normal and wide.Touch [<1>](e D) to display the RTTY decoder (2)screen.• Touch [<1>] or [<2>](D) to toggle between the RTTY de-coder and the RTTY decode (2) screens.Touch [LOG](r D) to display the “RTTY DECODELOG” screen.Touch “Decode Log,” and then select the RTTY de-tcode log function ON or OFF.• If desired, touch the item for 1 second to open the Defaultset window, then select “Default” to reset to the defaultsetting.• When “ON” is selected, the RTTY decode log starts.Touch [y ](D) or push MENU (C) to return to theRTTY Decoder screen.The functions for RTTY operation (Continued)The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch panel)Left RightCenterDisplayTouch [LOG]Touch “DecodeLog”Touch “ON”