4 RECEIVE AND TRANSMIT4-30Previous viewStoring a non standard repeaterDTurn OFF the Auto Repeater function in the “Func-qtion” Set mode. (p. 4-28)SET (C) > Function > SPLIT/DUP > Auto RepeaterWhile the “M-1” menu is selected, touch [A/B](w D) toselect VFO A.Rotate the Dial to set the repeater output frequency.eTouch [A/B](r D) to select VFO B.Rotate the Dial to set the repeater input frequency.ty Push MENU (C) to display the “M-2” screen (M-2menu), then touch [TONE](D) to turn ON the previ-ously set tone encoder.u Push MENU (C) to display the “M-1” screen (M-1menu), then touch [A/B](D) to select VFO A.Touch [SPLIT](i D) to turn ON the Split function.Rotate [M-CH](o L) to select the desired memorychannel.• “BLANK” appears when a blank channel is selected.• Rotate [BANK](L) to select the desired bank, if needed.!0 Touch [MW](D) for 1 second to store the set con-tents into the selected memory channel.Repeater operation (Continued)The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch panel)Left RightCenterDisplayTouch [A/B]Touch [TONE]Push MENU (C)Push MENU (C)VFO ASplit iconVFO B“M-1” menu“M-1” menu“M-2” menuTouch [A/B]Touch [SPLIT]Touch [MW] for1 second
