Icom IC-7100 Instruction Manual

Also see for IC-7100: Finger touch operation Specification Basic Manual Service manual Advanced instructions

Contents

Icom IC-7100 Instruction Manual Manual pdf 91 page image

11 MEMORY OPERATION11-3Previous viewSelecting in the VFO modeDTouch the Memory channel number indication onceqor twice to select the VFO mode. (p. ??-??)Rotate [BANK](w L) to select a Memory bank thatcontains the channel you want to select.Rotate [M-CH](e L) to select a Memory channel num-ber.• Rotate clockwise to select a higher Memory channelnumber; rotate counterclockwise to select a lower Mem-ory channel number.• All Memory channels, including blank channels, can beselected.• “BLANK” appears when no information has been pro-grammed into the Memory channel. (Blank channel)• You can do either step r or t fi rst.NOTE: When the PBT indicator lights green, orthe RIT indicator lights orange, push [M-CH](L)to turn OFF the indicator fi rst, and then rotate it.Touch the Memory channel number indication to se-rlect the Memory mode.• “MEMO” and the Memory channel contents appear.Selecting in the Memory modeD Touch the Memory channel number indication onceqor twice to select the Memory mode. (p. ??-??)Rotate [BANK](w L) to select a Memory bank thatcontains the channel you want to select.Rotate [M-CH](e L) to select a Memory channel num-ber.• Rotate clockwise to select a higher Memory channelnumber; rotate counterclockwise to select a lower Mem-ory channel number.• All Memory channels, including blank channels, can beselected.• “BLANK” appears when no content has been programmedinto the Memory channel. (Blank channel)• Memory channels can also be selected using the micro-phone [UP]/[DN] keys. In such case, the blank channelsare skipped.While in the VFO modeWhile in the Memory modeAppearsAppearsAppearsOuter: [BANK]Inner: [M-CH]Selecting a Memory channelThe L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch panel)Left RightCenterDisplay