Icom IC-7100 Instruction Manual

Also see for IC-7100: Finger touch operation Specification Basic Manual Service manual Advanced instructions

Contents

Icom IC-7100 Instruction Manual Manual pdf 41 page image

4 RECEIVE AND TRANSMIT4-25Previous viewA repeater receives transmitted signals and retransmitsthem on a different frequency. When using a repeater,the transmit frequency is shifted from the receive fre-quency by a frequency offset.A repeater can be accessed using the duplex function-by setting the frequency shift to the same value as therepeater’s frequency offset.See page 94 for details on accessing a D-STAR®repeater.Touch the Memory channel indication once or twiceqto select the VFO mode.Select the desired frequency band. (p. 35)wOn the Mode selection screen, touch “FM” to selectethe FM mode.Rotate the Dial to set the receive frequency (Repeat-rer output frequency).When the Auto Repeater function is turned ON(available in only the U.S.A. and Korea versions),steps t and y are not necessary. (p. 67)t Push MENU (C) one or more times to display the“M-2” screen (M-2 menu), then touch [DUP](D) oneor more times to set the offset direction.• “DUP–” or “DUP+” appears.• The transmit frequency (repeater input frequency) ap-pears above the function menu.• The frequency offset (amount of shift) can be set in the“DUP Offset” item of the Function Set. (p. 163)Touch [TONE](y D) to turn ON the repeater tone.• “TONE” appears.• The tone frequency can be set in the “TONE” screen.88.5 Hz is set by default. (p. 4-25)Communicate in the normal way.u• Subaudible tones are superimposed on your transmit sig-nal.Repeater operationThe L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch panel)Left RightCenterDisplayFrequency Offset settingThe frequency offset (amount of shift) can be set in the“DUP Offset” item of the Function Set. (p. 163)SET (C) > Function > SPLIT/DUP > DUP OffsetFrequency offset5.0000 MHzIf the Repeater tone frequency or the frequency off-set is changed, the tone frequency or frequency off-set for auto repeater function is also changed.Repeater tone iconTransmit frequency(Repeater input frequency)Duplex icon