Icom IC-G80 Instruction Manual

Icom IC-G80 Instruction Manual Manual pdf 10 page image

5[3] • [T.SCAN](3)➥ Numeric input and DTMF code: ‘3’➥ After pushing [FUNC](M), starts a tone scan.(p. 26)[4] • [T/A](4)➥ Numeric input and DTMF code: ‘4’➥ After pushing [FUNC](M), turns the Talk Aroundfunction ON or OFF. (p. 19)[5] • [SCAN](5)➥ Numeric input and DTMF code: ‘5’➥ After pushing [FUNC](M), starts a scan. (p. 19)[6] • [SKIP](6)➥ Numeric input and DTMF code: ‘6’➥ After pushing [FUNC](M), sets or cancels the skipsetting. (p. 22)[7] • [PRIO](7)➥ Numeric input and DTMF code: ‘7’➥ After pushing [FUNC](M), starts a priority watch.(p. 23)[8] • [SET](8)➥ Numeric input and DTMF code: ‘8’➥ After pushing [FUNC](M), enters the Set mode.(p. 30)[9] • [H/M/L](9)➥ Numeric input and DTMF code: ‘9’➥ After pushing [FUNC](M), selects the outputpower between high, mid and low. (p. 16)[0] • [DTMF-M](0)➥ Numeric input and DTMF code: ‘0’➥ After pushing [FUNC](M), enters the DTMF mem-ory mode. (p. 27)[M] • [FUNC](M)➥ DTMF code: ‘M (indication: E)’➥ Push to access the second function of otherkeys.[# ENT] • [MN.W](# ENT)➥ DTMF code: ‘# (indication: F)’➥ After entering a channel number (0-9), push to setthe channel. (p. 15)➥ Push to exit the Set mode or Initial Set mode.(pp. 30, 34)➥ After pushing [FUNC](M), hold down for 1 secondto enter the channel name programming mode.(p. 18)2 PANEL DESCRIPTION■ Front, top and side panelsD KEYPAD (Continued)