Icom IC-G80 Instruction Manual
                                                | |
Contents
| 
62■ Function displayq BUSY ICON➥ Appears when a signal is being received, or the squelchis open.➥ Blinks while the Monitor function is ON. (p. 14)w SIGNAL ICONS➥ Shows the strength of the received signal. (p. 15)➥ While transmitting, shows the output power level.(p. 16)e TONE ICONS➥ “ ” : While the Repeater tone encoder is ON. (p. 20)➥ “ ” : While the Tone Squelch function is ON. (p. 24)➥ “ D ” : While the DTCS Squelch function is ON. (p. 24)➥ “ D ” and “ ” : While the DTCS encoder is ON. (p. 24)➥ “ ” and “ ” or “ D ” : While the Pocket Beep function (withCTCSS or DTCS) is ON. (p. 24)r MEMORY ICONBlinks while scanning. (p. 22)t ALPHANUMERIC DISPLAY➥ Displays the operating channel, channel name, Setmodes’ contents and a variety of other information.• The decimal point blinks during a scan.➥ Displays the selected DTMF memory channel number. (p. 27)y BATTERY ICONS (p. 13)➥ “ ” appears when the battery pack/case is attached.➥ “ ” appears when the battery is nearing exhaustion.Charging the battery pack, or replacing the batteries inthe case is necessary.u KEY LOCK ICONAppears when the Key Lock function is ON. (p. 16)i VOX ICONAppears when the VOX function is ON. (p. 41)o POWER ICONS (p. 16)➥ “H” appears when high power is selected.➥ “M” appears when mid power is selected.➥ “L” appears when low power is selected.!0 AUTO POWER OFF ICONAppears when the Auto Power OFF function is ON. (p. 35)!1 TALK AROUND ICONAppears when the Talk Around function is ON. (p. 19)!2 SKIP ICONAppears when the selected memory channel is set as askip channel. (p. 22)!3 FUNCTION ICONAppears when the second function can be accessed.!4 TRANSMIT ICONAppears while transmitting. (p. 16)2PANEL DESCRIPTIONuq e t(Decimal Point)!4!0!1rw!2!3yoi1345678910111213141516171819 |
Related manuals for Icom IC-G80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine