Icom IC-G80 Instruction Manual

Icom IC-G80 Instruction Manual Manual pdf 34 page image

298 DTMF MEMORY■ Confirming a DTMF memoryThe DTMF tones in a memory channel can be confirmed.qPush [FUNC](M), and then [DTMF.M](0) to enter the DTMFmemory mode.wPush [] or [] to select a DTMF memory channel.ePush [MONI] to confirm the DTMF memory contents.• The programmed DTMF code sequence sounds.• After sounding, the transceiver exits the DTMF memory mode.■ Setting DTMF transfer speedWhen slow DTMF transmission speeds are required, thetransceiver’s DTMF transmission speed can be adjusted inthe Initial Set mode.q While holding down [] and [], turn ON the power toenter the Initial Set mode.w Push [] or [] to select the DTMF speed item. (dtd)e Rotate [VOL] to select a speed.• dtd. 1 : 100 milliseconds interval; 5.0 cps• dtd. 2 : 200 milliseconds interval; 2.5 cps• dtd. 3 : 300 milliseconds interval; 1.6 cps• dtd. 5 : 500 milliseconds interval; 1.0 cps(cps=characters per second)r Push [# ENT](MN.W) to exit the Initial Set mode.Exits the DTMF memory mode.The programmed DTMF codesequence sounds.