Icom IC-G80 Instruction Manual
                                                | |
Contents
| 
20678910111213141516171819123455REPEATER OPERATION■ Subaudible tone encoderSome repeaters require subaudible tones to be accessed.Subaudible tones are superimposed over your transmittedsignal and must be set first.q Push [FUNC](M) then [SET](8) to enter the Set mode.wPush [] or [] to select the Repeater tone encoder item.(rt)eRotate [VOL] to select the subaudible tone.rPush [# ENT](MN.W) to exit the Set mode.• Available subaudible tone frequencies (unit: Hz)D Tone informationSome repeaters require a different tone system to be ac-cessed.DTMF TONESWhile pushing [PTT], push the desired DTMF keys, [0] to [9],[MONI](A), [](B), [](C), [ ](D), [M](E), or [# ENT](F),to transmit their assigned DTMF codes.• The transceiver has 16 DTMF memory channels (p. 27).DTCS CODESPush [FUNC](*), and then [TONE](1) one or more times toactivate the DTCS encoder, and then push [PTT].• “ D ” and “ ” appear.• The specified DTCS code is superimposed over your transmittedsignal.• See page 24 for DTCS code setting details.✔ CONVENIENT!Tone scan function:If you don’t know the subaudible tone or DTCS code used fora repeater, the tone scan is convenient for detecting it.➥ Push [FUNC](M), and then [T.SCAN](3) to start a tonescan.• When the required tone frequency or DTCS code is detected, thescan pauses, and it is temporarily set.• See page 26 for Tone Scan function details.88.5 Hz repeater tone[VOL]67.069.371.974.477.079.782.585.488.591.594.897.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1 |
Related manuals for Icom IC-G80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine