Icom IC-G80 Instruction Manual

Icom IC-G80 Instruction Manual Manual pdf 40 page image

359 SET MODES■ Initial Set mode itemsD Key-touch beepTurns the key-touch beep ON (the beep level 1 to 3) or OFF.• When changing the beep level, beeps sound at the level.D Time-out timerTo prevent accidental prolonged transmission, the transceiverhas a Time-out Timer. This function cuts transmission OFFafter 1 to 30 minute of continuous transmission.To turn OFF the function, select “tot.OF.”• tot.OF : Turns OFF the function.• tot.1 to 30 : If continuous transmission exceeds the selected time pe-riod (1 to 30 minutes), the transmission will be cut off.Approximately 10 seconds before the Time-out Timer is ac-tivated, the transceiver sounds a beep tone as a warning.Be careful! When using the BP-263 battery case, the bat-teries will become hot if this Time-out Timer function isturned OFF or set to a long time period, and transmissionis made for long periods.D Auto power-OFFThe transceiver can automatically turn itself OFF after aspecified time. Activating a control or receiving a signal re-starts the time-out. The transceiver beeps before turning OFF.30 minutes, 1 hour, 2 hours and OFF can be specified. Thespecified time period is retained even when the transceiver isturned OFF by the Auto Power OFF function. To cancel thefunction, select "POF.OF."• POF.OF : Turns OFF the function.• POF.30/1H/2H : The transceiver is automatically turned OFF when nooperation occurs during the selected time period.D LockoutSelect a Lockout function option.• RLO.OF : Turns OFF the function.• RLO.RP : The Repeater Lockout Inhibits transmitting when thechannel is busy, except while receiving a signal that in-cludes a matching repeater tone.• RLO.bU : The Busy Lockout Inhibits transmitting when the channelis busy.