Icom IC-G80 Instruction Manual

Icom IC-G80 Instruction Manual Manual pdf 32 page image

27The DTMF codes are used for autopatching, controlling otherequipment, and other operations. The transceiver has 16DTMF memory channels (d0–d9, dA, db, dC, dd, dE and dF)for storage of often-used DTMF code sequences of up to 24digits.qPush [FUNC](M), and then [DTMF.M](0) to enter the DTMFmemory mode.wPush [] or [] to select a DTMF memory channel.• If previously programmed, the DTMF code is displayed.eHold down [DTMF.M](0) for 1 second to enter the program-ming mode.• “_ _ _ _ _” appears.• The previously programmed memories will be cleared by thisoperation.r Push keys to input a DTMF code sequence of up to 24digits.• [0]–[9] inputs “0”–“9,” [MONI] inputs “A,” [] inputs “B,” []inputs “C,” [ ] inputs “D,” [M] inputs “M (E)” and [# ENT](MN.W) inputs “# (F).”• If a digit is mistakenly input, push [PTT] momentarily, then re-peat from step e.t Repeat step r until the code is input.y Push [PTT] to store the DTMF code sequence and exit theprogramming mode.• When the 24th digit is input, the transceiver automatically storesthe code sequence and returns to step w.u Push [ ] to exit the DTMF memory.• Programming mode indicationThe programming mode consists of 5 pages.Push , and then .Hold down for 1 secondThe next page appears whenthe 6th digit is input.■ Programming a DTMF code sequenceDTMF MEMORY8Page Digits Indication1st 1st to 5th No indication.2nd 6th to 10th “ ” appears.3rd 11th to 15th “ ” appears.4th 16th to 20th “ ” appears.5th 21st to 24th “ ” blinks.