Icom IC-G80 Instruction Manual

Icom IC-G80 Instruction Manual Manual pdf 33 page image

2898DTMF MEMORYThe transceiver has two methods of transmitting a DTMFcode sequence. Select an option in the Set mode.q Push [FUNC](M), and then [SET](8) to enter the Set mode.wPush [] or [] to select the DTMF TX key item (dmt).eRotate [VOL] to select an option.• dmt.k : Transmits the appropriate DTMF code assigned to thekey.• dmt.m : Transmits the programmed DTMF code sequence in theDTMF memory channel assigned to the key.r Push [# ENT](MN.W) to exit the Set mode.D Manual DTMF code transmissionFirst, set the DTMF TX key to “dmt.k” in the Set mode.➥ While holding down [PTT], push the keys to transmit aDTMF code sequence manually.• Push [0]–[9] for “0”–“9,” [MONI] for “A,” [] for “B,” [] for “C,”[ ] for “D,” [M] for “M,” and [# ENT](MN.W) for “#.”D Using a DTMF memory channelFirst, set the DTMF TX key to “dmt.m” in the Set mode.➥ While holding down [PTT], push one of the keys to trans-mit the DTMF code sequence in the memory.• Pushing [0] to [9], [MONI](A), [](B), [](C), [ ](D), [M](E), or [# ENT ](MN.W)(F) transmits a DTMF code channel (d0–d9, dA, dB, dC, dD, dE or dF) respectively.■ Transmitting a DTMF code sequence 1234567810111213141516171819