309109SET MODES■ Set mode programmingThe Set mode is used to change the settings of the trans-ceiver’s functions.D Set mode operationq Push [FUNC](M), and then [SET](8) to enter the Set mode.w Push [] or [] to select the item.e Rotate [VOL] to select the option or value.r To exit the Set mode, push [# ENT](MN.W).12435678111214131516171819• Repeater tonefrequency (p. 31)• Tone squelchfrequency (p. 31) • DTCS code (p. 31) • DTCS polarity (p. 31)• Scan resume setting (p. 32)• Function key timer (p. 32)• VOX gain (p. 32 )• Microphone gain (p. 33)• VOX delay (p. 33 )• VOX time-out timer(p . 33)• DTMF TX key (p. 33 ) : Push: Push• Operating mode (p. 33)• LCD backlight (p. 32)
