103BATTERY PACKS92 ACCESSORIES‘‘ Accessory attachmentD AntennaAttach the antenna onto the transceiver as il-lustrated at right.Keep the jack cover attached when jacks arenot in use to avoid bad contacts.D Belt clipAttach the belt clip to the transceiver as illustrated below.To attach the belt-clip To release the belt-clip‘‘ Battery pack replacementBefore replacing the battery pack, push [POWER] for 1 sec. to turnthe power OFF.• Push the battery releaseforward, then pull thebattery pack upwardwith the transceiver fac-ing you.DD BATTERY PACKS*1 Operating periods are calculated under the following conditions;Tx : Rx : standby =5 : 5 : 90, power save function: auto setting, is activated*2 Operating period depends on the alkaline cells used. (BP-208 only)yrettaBkcap egatloV yticapaCdoirepgnigrahCgnitarepO*doirep 1BC-146ro441-CB121-CB49-DAhtiwBP-208*2 AArofesacyrettaB)6R( × enilakla6 A/N902-PB V2.7 srh21 srh5.1 srh7.5012-PB V2.7 0561hAm srh18.5 srh0.2 srh111100mAh222-PB V2.7 006hAm srh6.5 srh0.1 srh4