Icom IC-V8 Instruction Manual
Also see for IC-V8: Instruction manualInstruction manualService manualService manual
                                  | |
Contents
|
276 MEMORY PROGRAMMING287DTMF MEMORY Programming a DTMF codeThe transceiver has 5 DTMF memory channels (d0 to d4) forstorage of often-used DTMF codes of up to 24 digits.q Push [0•DTMF - M] after pushing[A•FUNC] to enter DTMF memory.• One of “d0” to “d4” appears.w Rotate [VOL] to select the desiredchannel.e Push [0•DTMF - M] for 1 sec. afterpushing [A•FUNC] to enter DTMFprogramming mode.• “_ _ _ _ _” appears.• Programmed memories can be cleared in this way.r Push the digit keys, [A•FUNC], [B•CALL], [C•MR], [D•CLR], [✱•OP-TION] and [#•ENT ] to enter the desired DTMF code.• A maximum of 24 digits can be input.• [✱•OPTION] enters as “E”, [#•ENT ] enters as “F.”• If a digit is mistakenly input, push [SQL] or [PTT] momentarilythen repeat from step q.t Push [SQL] or [PTT] to input the digits and exit DTMF pro-gramming mode.• Programmed DTMF codes sound when [SQL] is pushed to exit.MRMRD Memory/call ➾ call/memoryq Select the memory (call) channel to be transferred:Push [C•MR] ([B•CALL]) to select memory (call) mode.Push [Y]/[Z] to select the memory channel.• When “dial” is assigned [VOL], rotate [VOL] to select the memorychannel. (p. 51)w Push [C•MR] momentarily after pushing [A•FUNC].• “--” and “X” flashes.e Push [Y]/[Z] to select the target memory.• When “dial” is assigned [VOL], rotate [VOL] to select the memorychannel. (p. 51)r Push [C•MR] for 1 sec after pushing [A•FUNC].• Memory mode is selected and the contents are transferred tothe target memory.D Clearing a memoryq Push [C•MR] after pushing [A•FUNC] to enter memory transfermode.• “X” and a memory channel number flash.w Push [Y]/[Z] to select the memory channel to be cleared.• When “dial” is assigned [VOL], rotate [VOL] to select the memorychannel. (p. 51)• The call channel cannot be cleared.e Push [C•MR] after pushing [A•FUNC] momentarily, then push[C•MR] for 1 sec after pushing [A•FUNC] again.• Perform this operation within 1.5 sec.• The contents of the selected memory are cleared.r Push [D•CLR] to return to regular operation. |
Related manuals for Icom IC-V8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine