Icom IC-V8 Instruction Manual

Also see for IC-V8: Instruction manual Instruction manual Service manual Service manual

5011OTHER FUNCTIONSDD Auto repeaterThe auto repeater function automatically turnsON or OFF the duplex operation with speci-fied shift direction and tone encoder, when theoperating frequency falls within or outside of145.200–145.495, 146.610–146.995 and147.000–147.395 MHz range. The offset andrepeater tone frequencies are not changed bythe auto repeater function, reset these frequencies, if necessary.• RPt.OF : The auto repeater function is turned OFF.• RPt.R1 : Activates for duplex only. (default)• RPt.R2 : Activates for duplex and tone.DD Auto power-offThe transceiver can be set to automaticallyturn OFF after a specified period with beep inwhich no key operations are performed.• 30 min., 1 hour, 2 hours and OFF (default)can be specified. The specified periods is re-tained even when the transceiver is turnedOFF by the auto power-off function. To can-cel the function, select “POF.OF” in this set mode.DD Repeater lock-outSelects lockout type from repeater, busy andOFF.• RLO.RP : The repeater lockout is turned ON.• RLO.bu : The busy lockout is turned ON.• RLO.OF : Any lockout is not activated.(default)U.S.A. version onlyMRF TXAO MRF TXMRF TXMRF TXMRF TXMRF TX4911 OTHER FUNCTIONS‘‘ Initial set modeThe initial set mode is accessed at power on and allows you to setseldom-changed settings. In this way, you can “customize” trans-ceiver operations to suit your preference and operating style.DD Entering initial set modeq Turn power on while [∫] and [√] are pushed.w Push [∫] or [√] to select item.e Rotate [VOL] to select condition/value.• To exit set mode, push [#•ENT ].DD Key-touch beepTurns key-touch beep emission ON and OFF.• Default: ONDD Time-out timerTo prevent accidental prolonged transmission,etc., the transceiver has a time-out timer. Thisfunction cuts a transmission OFF after 1–30min. of continuous transmission. This timercan be cancelled.• tOt.OF : The time-out timer is turned OFF. (default)• tOt. 1–30 : The transmission cut OFF after the set period elapses.AT POWER ONMRF TXMRF TX