Icom IC-V8 Instruction Manual

Also see for IC-V8: Instruction manual Instruction manual Service manual Service manual

4410PAGER/CODE SQUELCHD Waiting for call from a specific stationq Set the operating frequency.w Push [✱•OPTION] after [A•FUNC] is pushed.• 100 MHz digit shows “P.”e Wait for a call.• When receiving a call, the caller’s ID or group code appears asshown below.• DO NOT push any digit keys while code channels C0 to C6 are dis-played, or code channel contents are changed.r Push [PTT] to send an answer back call and display the operat-ing frequency.t After confirming a connection push [✱•OPTION] after [A•FUNC] ispushed to select code squelch operation, or repeat previous keyoperation again to select non-selective calling system.• PERSONS CALLSThis display appears when you are calledwith your ID code and the calling station’s IDcode is 123.• GROUP CALLSThis display appears when you are calledwith the group code, 888, and 888 has beenprogrammed into code channel C6.• ERROR INFORMATIONWhen the transceiver receives an incompletesignal, “E” and previously received code ap-pear.SKIPMRF TXCP and flash.MRF TXCode channelMRF TXPreviously receivedcode.4310 PAGER/CODE SQUELCH‘‘ Pager operationD Calling a specific stationq Program the needed code channel in advance (p. 41).w Set the operating frequency.• Set the AF and squelch to the desired level as the normal operation.e Push [✱•OPTION] after [A•FUNC] is pushed.• Pager mode is selected.• 100 MHz digit shows “P.”r Select the desired transmit code channel:➥ Push [8•SET] after [A•FUNC] is pushed.➥ Rotate [VOL] to select the desired code channel.➥ Push [#•ENT ] to return to previous condition.t Push [PTT] to transmit the pager code.y Wait for an answer back.• When the transceiver receives an answer back code, the functiondisplay shows the other member’s ID or group code.u After confirming a connection push [✱•OPTION] after [A•FUNC] ispushed to select code squelch operation, or repeat previous keyoperation again to select non-selective calling system.• DO NOT push any digit keys while code channels C0 to C6 are dis-played, or code channel contents are changed.i Communicate with the other party as normal: push [PTT] totransmit; release to receive.Optional UT-108 requiredMRF TX