81PANEL DESCRIPTIONPANEL DESCRIPTION17‘‘ Function displayq FUNCTION INDICATORAppears while the secondary function can be accessed.w SKIP CHANNEL INDICATORAppears when the selected memory channel is set as a “skip”channel. (p. 32)e DUPLEX INDICATOREither “–” or “+” appears during repeater operation (p. 21).r TONE ENCODER INDICATORAppears when tone encoder is in used. (p. 21)t POCKET BEEP INDICATORAppears during pocket beep operation (p. 37).y TONE SQUELCH INDICATORAppears when tone squelch is in used. (p. 35)u DTCS INDICATORAppears when DTCS tone is in used. (p. 35)i TRANSMIT INDICATORAppears during transmit. (p. 18)SKIPAOLMRF TX755025Dqq qw qe qr qt qy qu qi qo!5!4!3q!2!0!1o SIGNAL INDICATORAppears when the channel is in busy and shows receiving signalstrength as below.Weak ⇐ RX Signal level ⇒ Strong!0 LOW POWER INDICATORAppears when low output power is selected. (p. 18)!1 KEY LOCK INDICATOR (p. 19)Appears during the key lock function ON.!2 FREQUENCY READOUTShows operating frequency, channel number or channel names,depending on display mode (p. 20).!3 MEMORY CHANNEL INDICATORIndicates the selected memory channel number or other itemssuch as the call channel, etc. (pgs. 19, 25)!4 MEMORY MODE INDICATORAppears while in memory mode or channel number indicationmode. (p. 25)!5 AUTO POWER OFF INDICATORAppears while the auto power OFF function is activated. (p. 50)