4811OTHER FUNCTIONSDD Transmission permissionTurns transmission permission ON and OFF.This function can be set for each memory andcall channel, independently.• tX .ON: Transmission is permitted. (default)• tX .OF : Transmission is inhibited.DD Pager/Code squelch channelPrograms 3-digit ID code in channel “C0”and individual or group call code in channel“C1” to “C6” for the pager and code squelchfunctions. See p. 41 for programming details.*This item appears only when the optional UT-108 is installed and pageror code squelch function is activated.Optional UT-108 requiredMRF TXMRF TX4711 OTHER FUNCTIONSDD Tuning stepSelects tuning step from 5, 10, 12.5, 15, 20,25 , 30 and 50 kHz.DD Scan pause timerSelects the scan pause time from SCt.5,SCt.10, SCt.15 and SCP. 2. When receivingsignals, the scan pauses according to thescan pause time.• SCt. 5/10/15 : Scan pauses for 5/10/15 sec.(default: SCt.15)• SCP. 2 : Scan pauses until signal dis-appears. Resumes after 2 sec. from signal disap-pearing.DD Function key timerSelects [A•FUNC] effect timer from F0.At,F1.At, F2.At, F3.At and F .m.• F0.At : “ ” disappears immediately after(default) secondary function is operated.• F1/2/3.At : “ ” disappears after 1/2/3 sec.from secondary function is oper-ated.• F .m : “ ” appears until [A•FUNC] is pushed again.DD LCD backlightSelects LCD backlight lighting condition fromauto, ON and OFF.• LIG.At : Lights when any keys except[PTT] is pushed. (default)• LIG.ON : Lights continuously during the transceiver poweredON.• LIG.OF : Never lights.FFFMRF TXMRF TXMRF TXMRF TXMRF TXMRF TX