297 DTMF MEMORY308SCAN OPERATIONPROGRAMMED SCANMEMORY (SKIP) SCANMch 0 Mch 6Mch 1 Mch 3Mch 2 Mch 4 Mch 5Mch 7Mch 99 Mch 10 Mch 9 Mch 8ScanScan edgesPRIORITY WATCHMch 3Priority memory channel scanPriority channel50 msec.VFO frequency145.20 MHz5 sec.Mch 3Mch 5Mch 1Mch 2 Mch 4Mch 6SKIPMch 9950 msec.MemoryscanPriority channelPriority memory channel watchVFO frequency145.20 MHz5 sec.SKIPSKIPBand edge Band edgeJump1A2A3A1b2b3b Scan types Transmitting a DTMF codeD Using a DTMF memory channelq Push [0•DTMF-M] after pushing [A•FUNC] to enter DTMF memory.w Rotate [VOL] to select the desired channel.r Push [SQL] or [PTT] to exit DTMF memory mode.t While pushing [PTT], push [SQL] to transmit the selected DTMFmemory.• After the DTMF code is transmitted, returns to receive automati-cally.D Manual DTMF code transmissionq While pushing [PTT], push digit keys, A–F to transmit aDTMF code manually.• Once DTMF code key is pushed, the transmission is kept for 1 sec.after release the key even [PTT] is released. DTMFtransmission speedWhen slow DTMF transmission speeds are required with DTMFmemory transmission (as for some repeaters), the transceiver’s rateof DTMF transmission can be adjusted.q While pushing [Y] and [Z], turn thepower on to enter INITIAL SET MODE.w Push [Y]/[Z] several times until “dtd”appears.e Rotate [VOL] to select the desiredDTMF transmission speed.• Four speeds are available: “1” (100msec. intervals) is the fastest; “5” (500msec. intervals) is the slowest.r Push [#•ENT ] to exit INITIAL SET MODE.USING INITIAL SET MODEMRMR