12 MEMORY OPERATION12-3■ Selecting a Memory channelThe Memory mode is used for operation on memorychannels, which store programmed frequencies, callsigns and other data.q Push [M/CALL] several times to select theMemory mode.• “ ” appears when the Memory mode is selected.• Push [M/CALL] again to select the Memory mode orWeather channel mode*. The Memory mode, Call chan-nel mode or Weather channel mode* are alternately se-lected.*Appears only for the USA version transceivers.w Rotate [DIAL] to select a desired memory channel.• Only programmed memory channels can be selected.• See page 12-4 for memory programming details.[DIAL]■ Selecting a call channelCall channels are used for quick recall of most often-used operating settings.q Push [M/CALL] one or more times to select theCall channel mode.• Push [M/CALL] again to select the Memory mode orWeather channel mode*. The Memory mode, Call chan-nel mode or Weather channel mode* are alternately se-lected.*Appears only in the USA version transceivers.w Rotate [DIAL] to select the Call channel between“C0” to “C3.”[DIAL]AppearsRotate [DIAL] to select thememory channel numberRotate [DIAL] to select
