16 MENU SCREEN16-16■ DUP/TONE itemsOffset Freq (Default: 0.600.00*)DUP/TONE... > Offset FreqSet the frequency offset for duplex (repeater) operation to between 0 and59.99500 MHz.• The selected tuning step in the VFO mode is used when setting the offset.• Push [V/MHz] to select 1 MHz or 10 MHz steps.• The duplex shift direction (DUP-/DUP+) is set in the QUICK MENU screen.(p. 15-5)*The default value may differ, depending on the frequency band (selectedas the Main band before entering the Menu screen) and the transceiverversion.Repeater Tone (Default: 88.5)DUP/TONE... > Repeater ToneSelect subaudible tone frequencies, for repeater access and other functions.50 tone frequencies (67.0~254.1 Hz) are selectable.TSQL Freq (Default: 88.5)DUP/TONE... > TSQL FreqSelect the tone frequency for the tone squelch or pocket beep. 50 frequen-cies (67.0~254.1 Hz) are selectable.• Selectable repeater tone/tone squelch frequencies (Unit: Hz)67.069.371.974.477.079.782.5085.4088.5091.5094.8097.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1TIP: The transceiver has 50 tone frequencies and consequently their spac-ing is narrow compared with units having 38 tones. Therefore, some tonefrequencies may receive interference from adjacent tone frequencies.
