12 MEMORY OPERATION12-5■ Copying memory and Call channel contentsThis function copies a memory channel’s contents tothe VFO, another memory or Call channels. This is use-ful when searching for signals around a memory chan-nel frequency, and for recalling the frequency offset,subaudible tone frequency and so on.D Memory or Call channelVFOq Select the Memory or Call channel to be copied.➥ Push [M/CALL] one or more times to selectthe Memory mode or the Call channel mode, thenrotate [DIAL] to select a desired channel.w Hold down [S.MW] for 1 second to enter theSelect Memory write mode, and copy the memorycontents.• 1 short and 1 long beep sounds.• The memory channel number blinks.e Rotate [DIAL] to select “VFO.”r Hold down [S.MW] for 1 second to copy the se-lected channel contents to the VFO.• The transceiver automatically returns to the VFO.[DIAL]Select the memory or callchannel to be copied.Hold down [S.MW]for 1 second to enterthe Select Memory writemode, and then, rotate[DIAL] to select “VFO.”Hold down [S.MW]for 1 second to copy.The selected channelcontents appear in theVFO screen.NOTE: Holding down [S.MW] for 2 seconds instep w will also copy the memory contents to theVFO. In that case, steps e and r are not necessary.
