AM-800CL / AB-800CL- 12 -5. Input and output5.1 Connectors and pin assignment5.1.1 Hirose 12Pin connector5.1.1.1 FigureType: HR10A-10R-12PB-01 (Hirose) male.Use the part number HR10A-10P-12S for the cable side5.1.1.2 Pin assignment*1) XEEN output can be configured with complementary emitter follower circuit or opencollector by internal switch setting. The default is the complementary emitterfollower circuit. See chapter 5.1.3 for the details.*2) Factory default is trigger via Camera Link5.1.2 Camera Link connector5.1.2.1 FigureType: 26-pin MDR connector (3M 10226-1A10PL)Fig.5 Camera Link connectorPin no. Signal Remarks1 GND2 DC input +12V to +24V3 GND4 Iris video Only for Continuous and Trigger-dump modes.5 GND6 NC7 NC8 GND9 XEEN out *1)10 Trigger in TI=1 (or Camera Link TI=0). *2)11 DC input +12V to +24V12 GNDFig.4 Hirose 12-pin connector