AM-800CL / AB-800CL- 34 -7.7. Trigger width mode (so-called PWC)In this mode, the exposure time is equal to the trigger pulse width. Accordingly, longerexposure times are supported. Additional settings determine if the trigger pulse can beaccepted during the exposure period.Primary settings to use this modeAcquisition controlAcquisition frame rate: AR= 1～42964Exposure controlExposure mode: EM=2 (Trigger width)Trigger controlTrigger mode: TM=1 (ON)Trigger overlap: TO=0 (OFF) or 1=(Readout)OFF: LVALsync、Readout:LVALsync/async automatic settingTrigger source: TI=0 (Camera Link, default) or 1(Hirose 12-pin)Trigger Activation: TA=0 (High), 1=（Low）Minimum interval of the trigger pulseReadout mode FULL 2/3 AOI 1/2 AOI 1/4 AOI 1/8 AOIMinimum frame lines 2077 1566 1308 921 7297.7.1 If the overlap setting is “Non Overlap”Fig.32 Overlap = OFF6.56μs ± 25nsTriggerCCD ExposureEENXEENFVAL4.5L ～ 5.5L36.8μs ± 25ns2L(Min.)
