AM-800CL / AB-800CL- 39 -Fig.37 Tap control8.4. Exposure auto (Related Commands : ASC=1(ON),ASCS,ASCEA,ASCEI)The exposure can be automatically controlled by setting the command ASC to ON.The adjusting range is 58.733 ms to 10μs. The tracking speed can also be set.Command ValueAdjusting range ASCEA, ASCEI 10μs to 58.733msTracking speed ASCS 1 to 16 (Default:8)ASCEA: Sets the maximum exposure in the ASC modeASCEI: Sets the minimum exposure in the ASC modeNote: This function works only in continuous mode or edge-dump mode.8.5. Auto white balance (Related commands:AWB, PGS, PGR, PGGR, PGGB, PGB)In this function, the gain of each R, Gr, Gb and B color can be individually adjusted to getthe proper white balance.B3 Gb2 B4B1 Gb1 B2Gｒ1 R Gｒ2Fig. 38 Auto white balanceTo adjust white balance, the AB-800CL has three methods: manual adjustment, one-pushauto white balance, and continuous auto white balance.AWB: 0 OFF (Manual adjustment)1 Once (One-push auto white balance)2 Continuous (always tracking)This function can be used with full resolution read out, as well as with AOI readout.This does not work in trigger mode.A BC DTo Camera Link I/FTap A Tap BTapC tapD
