JAI AM-800CL User Manual

Also see for AB-800CL: User manual

Contents

JAI AM-800CL User Manual Manual pdf 34 page image

AM-800CL / AB-800CL- 32 -7.6. Timed mode (so-called EPS operation)This mode allows a single image frame to be captured with a preset exposure time byusing the external trigger. Additional settings determine if the trigger pulse can beaccepted during the exposure period.The frame rate of full pixels readout is 17.0263fps for AM-800CL and 8.5fps for AB-800CL.Primary settings to use this modeAcquisition controlAcquisition frame rate: AR= 1～42964Exposure controlExposure mode: EM=1 (Timed)Exposure time: PE=10μs ～ 2000000μsTrigger controlTrigger mode: TM=1 (ON)Trigger overlap: TO=0 (OFF) or 1=(Readout)OFF: LVALsync Readout: LVALsync/async automatic settingTrigger source: TI=0 (Camera Link, default) or 1 (Hirose 12-pin)Trigger Activation: TA=0 (Rising edge), 1=（Falling edge）Note：The AM-800CL and AB-800CL prioritize the frame rate over the exposure time. If theexposure time is set at longer than 58.73ms (1 frame period), the frame rate mustbe increased so that it is longer than the exposure time.Minimum interval of the trigger pulseReadout mode FULL 2/3 AOI 1/2 AOI 1/4 AOI 1/8 AOIMinimum frame lines 2077 1566 1308 921 7297.6.1 If the overlap setting is “OFF”Fig.30 Non Overlap6.56μs ± 25μsTriggerCCD exposureEENXEENFVALExpsoure period4.5L ～ 5.5L2l(Min.)