Jenn-Air JGRP430WP00 Use & Care Manual

Also see for JGRP430WP00: Installation instructions Installation instructions

Contents

When cleaning a spill that has fallen through the bake burner cover, remove and reinstall the cover according to the instructions below.To Remove Oven Bake Burner Cover (30" [76.2 cm] and36" [91.4 cm] models and the Right Oven Cavity on 48"[121.9 cm] models)1. Remove oven racks and the extendable roller rack frominside the oven cavity. See the "Extendable Roller Rack"section in the Use and Care Guide.2. Remove the oven door. See the "Oven Door" section in theUse and Care Guide.3. Slide the bake burner cover to the right or left.d/A. Bake burner cover4. Lift up and remove oven bake burner cover and set it aside.Replace Oven Bake Burner Cover1. Align notches on the oven bake burner cover with shoulderscrews in the bottom of the oven.2. Lower cover and slide to left or right to slide shoulder screwsinto the narrow ends of the notches and lock in place.,t pA jjA. Bake burner cover3. Replace the oven door. See "Oven Door" in the "Range Care"section.To Remove Oven Bake Burner Cover (Left Oven Cavity on48" [121.9 cm] models)1. Remove oven racks.2. Remove the oven door. See the "Oven Door" section in theUse and Care Guide.3. Slide the bake burner cover to the right or left.B BA. Cover notches (4)B. Shoulder screws (4)4.A _A. Bakeburner coverLift up and remove oven bake burner cover and set aside.29