DAB-BA-e-1813 135.4 Danger Information! The moisture analyser is used to analyse the moisture content of materials.This instrument must be used exclusively for this purpose. Any other usagemay cause a risk to personnel, damage to the instrument or other materialdamage.! The moisture analyser should be used mainly for the drying of aqueoussubstances.! The moisture analyser may not be used in a hazardous area.! Do not use the moisture analyser in an explosive environment.! The operation and maintenance of the moisture analyser is restricted totrained competent specialist staff.! Carefully read this operation manual before setup and commissioning, even ifyou are already familiar with KERN instruments.! Never make any modifications or design changes to the equipmentwhatsoever. Always use original spare parts and accessories.! Make sure that liquids cannot penetrate the interior of the device, the terminalsat the rear of the device and the connected peripherals (such as printer, PC).If you spill liquid on the device, disconnect it immediately.Afterwards do not operate the moisture meter and have it checked by acompetent KERN stockist before any further use.Hazards during and after measuring! Ensure correct installation of all components, see chap. 7.3! Careful when removing the sample. The sample itself, the sample dish and theheating unit may be very hot.! Use the sample retainer at all times as it allows safe working and preventsburns.! Individual parts of the case (e. g. the ventilation grids) may heat upconsiderably during operation.